bcormon corrosion monitoring

Flange Access fitting include solid or hollow plug in it carry the internal corrosion monitoring or injection device. The get entry to fitting is permanently connected to the vessel or pipe, and the provider valve and retriever are used to insert or cast off the various probes, corrosion coupons or injection system.
This corrosion tracking access gadget is the global trendy for excessive pressure get entry to fitting systems and equipment for “get right of entry to below pressure” up to 6,000 psi (41 Mpa) and 450° F (232° C).

Material A105 CS, or others
Standard ASME B31.3
Standard Temperature Standard Temperature Rating with Viton/Teflon Seals:
From -15° F (-26° C) Up To +400° F (+204°C)
Type Flange RF, Flange RJ

2″ Ladder Corrosion Coupon of various length and models for 2″ system corrosion monitoring, which are commonly used for oil and gas, upstream and downstream, chemical companies, etc.

1 Pcs Corrosion Coupon consists of:

  1. Corrosion Coupon (AISI 1018 or others)
  2. Standard nylon insulator
  3. Serial number
  4. VCI cover / bag
  5. Envelope bag, silica and plastic bag

Ladder strip coupon holders are designed to concurrently screen corrosion at numerous tiers in a system line. this is a technique hired in massive diameter pipelines (8” O.D. and morein which corrosion might not be uniform across the diameter of the pipe, or in structures wherein flow is stratified.

minimal length holder of 26 cm (10.25″) is needed to mount three pairs of coupons.

Specifications:

Material AISI 1018, ASTM A106 gr B, or others
Weight Below 50 gram, depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 2″ x 7/8″ x 1/8″
Reference Catalog Bcormon
CORROSION COUPON
CATALOG

A connection fitting with a solid plug or hollow plug, it carries the monitoring of internal corrosion or an injection device. The access fitting is permanently attached to the container or driver, and the service valve and the retriever are used to insert or remove the different probes, corrosion coupon or injection equipment.

Material 316L / SS, A105 CS, or others
Standard ASME B31.3
Standard Temperature Standard Temperature Rating with Viton/Teflon Seals:
From -15° F (-26° C) Up To +400° F (+204°C)
Type Fitting Flarweld, Sockedweld, Buttweld, NPT

3″ Retractable Scale Coupons for 1” retractable systems, which are commonly used for oil and gas, upstream and downstream, chemical companies, etc.

1 pcs scale coupon consists of:

  1. Scale coupon (AISI 1018 or others)
  2. Standard nylon insulator
  3. Serial number
  4. VCI cover / bag
  5. Envelope bag, silica and plastic bag

Specifications:

Material AISI 1018, ASTM A106 gr B, or others
Weight Below 50 gram, depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 3″ x 1/2″ x 1/16″
Reference Catalog Bcormon

3″ Scale Coupons for 2″ system Corrosion Monitoring, which are commonly used for oil and gas, upstream and downstream, chemical companies, etc.

1 pcs scale coupon consists of:

  1. Scale coupon (AISI 1018 or others)
  2. Standard nylon insulator
  3. Serial number
  4. VCI cover / bag
  5. Envelope bag, silica and plastic bag

Specifications:

Material AISI 1018, ASTM A106 gr B, or others
Weight Below 50 gram, depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 2-7/8″ x 7/8″ x 1/8″

3″ Strip Corrosion Coupons model for 2“ System Corrosion Monitoring,  which are commonly used for oil and gas, upstream and downstream, chemical companies, etc.

1 pcs corrosion coupon consists of:

  1. Corrosion coupon (AISI 1018 or others)
  2. Standard nylon insulator
  3. Serial number
  4. VCI cover / bag
  5. Envelope bag, silica and plastic bag

Specifications:

Material AISI 1018, ASTM A106 gr B, or others
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 2-7/8″ x 7/8″ x 1/8″
Reference Catalog Bcormon

3″ Retractable strip Corrosion Coupon for 1″ system corrosion monitoring which are commonly used for oil and gas, upstream and downstream, chemical companies, etc.

1 pcs corrosion coupon consists of:

  1. Corrosion coupon (AISI 1018 or others)
  2. Standard nylon insulator
  3. Serial number
  4. VCI cover / bag
  5. Envelope bag, silica and plastic bag

Specifications:

Material AISI 1018, ASTM A106 gr B, or others
Weight Below 50 gram, depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 3″ x 1/2″ x 1/16″
Reference Catalog Bcormon

The Retractable Strip Corrosion and Scale coupon   a comprehensive range of weight loss coupons and holders covering applications in oil & gas, refinery and processing, water treatment and general industry.

Corrosion Inhibitor is a water based corrosion inhibitor formulated.

It will effectively inhibit corrosion caused by H2S, CO2 salt water and other elements. Designed to provide good film persistency and is dispersible in fresh and brine water. Low points in the bottom of flow lines where water has collected are protected because of the solubility of the product.

CHARATERISTICS:
Appearance Clear Liquid
Color Light Brown
Specific Gravity @ 25°C 0.95 – 0.99
pH 7 ~ 9
Solubility Water soluble, oil dispersible

APPLICATION:
A rule-of-thumb dosage rate is 10 – 20 ppm based on water production. This should be varied in accordance with the severity of the problem. Frequency and method of application vary over a wide range, depending upon individual characteristics.

STORAGE AND HANDLING:
Corrosion Inhibitor is non-flammable liquid. Use in well ventilated area. Keep container tightly closed when not in use. Wear appropriate PPE.

PACKAGING
Packaging in 200 liters drum.

2” System Coupon Holder is a mounting for corrosion coupon and scale coupon.
Solutions for the prevention and control of corrosion, variety of coupon support styles of coupon type. Below variety of coupon holder model.

  1. Strip Coupon Holder: Use to corrosion coupons or scale coupon type 3 “or 6” length, the length of holder base on the area position to monitor, top, middle or bottom.
  2. Adjustable Disc Coupon Holder: Use for monitoring flush with pipe commonly for pinging line, the length we can adjusted as flush of internal pipe .
  3. Fixed Disc Coupon Holder: Use for disc coupon with fixed monitoring poin
  4. Multiple Disc Coupon Holder: Use for disc coupon with monitoring top, middle and bottom pararel or simultan. Available for pipes with diameters of 6 “or more.
  5. Ladder Strip Coupon Holder : Use for strip coupon with monitoring top, middle and bottom pararel or simultan. Available for pipe with diameters of 6 “or more.

Retractable unit coupon insertion system commonly used in field and plants applications. A specially designed packaging gland is used to insert or retract a coupon from a pressure-stopped pressure system.

Retractable Specifications:

Std. Length 18″
24″
30″
36″
Material 316L SS
Temperature Rating 360° C
Pressure Rating 1500 PSI / 103.4 Bar
Mounting 1″ Full Port Valve (min.)
Standard Meets NACE MR0175 and MR0103
Reference Catalog Bcormon

HD protective cover designed to protect the exposed threads on access fittings from mechanical damage, dust, dirt and moisture.
Secondary Process Containment Covers offer an extra layer of protection when a second level of safety is required. With a pressure rating 3600 psi to 6,000 psi and standard viton o-ring, the high pressure retaining covers meet or exceed the extra level of protection required. ( standard only not include p gauge and bleed valve).

Material 316L SS, A105 CS, or others
Type – Heavy Duty Protective Cover Without Hole
– Heavy Duty Protective Cover With Hole
– Heavy Duty Protective Cover With Bleed Valve and Pressure Gauge

The Hollow Plug Assy is a key component to the high pressure Access Fitting assembly, as the plug body provides the seal in the access fitting, there by maintaining line pressure. The plug also serves an important function of holding the monitoring equipment which is exposed to the system, and is the component to which the Retriever attaches in order to access and service the monitoring equipment.

Hollow Plug Body 316L SS
Primary Packing PTFE Glass
Hollow Plug Bore 316L SS
Plug Nut 316L SS
Pipe Plug 316L SS
Set Screws 316L SS
Seal Plug Nut TEFLON, PTFE Glass, Others

Hollow Plug – used in conjunction with:

  • Electrical Resistance probes
  • Linear Polarization probes
  • Galvanic and Hydrogen probes

All supports are supplied with two assembly hardware assemblies, screw mounting for corrosion coupon so that it is not released with the lock. The insulation of coupons is supplied with the coupons, any material and length can be supplied in special order.

Material 316L / SS
Weight 20 gr

Multiple disc coupon available for pipes with diameters of 6 “or more. This method of protection against corrosion of the pipe offers the following advantages: Inherent orientation parallel to flow, greater area area at a specific level, greater quantity and variety of Coupon materials, easier monitoring in stratified flow or multi-phase flow, and the location of corrosion coupon in the assembly access recreation area for monitoring gas pockets or stagnant areas.

Multiple disc coupon 2″ system can be used to Monitor:

  1. Top of line
  2. Middle of line
  3. Bottom of line

Specifications:

Material AISI 1018, ASTM A106 gr B, or others
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension OD:1.25″, Thickness 1/8″
Refer Catalog Bcormon

Showing 1–15 of 23 results