Great deals and offers on all Chemical

Great deals and offers on all Chemical

Corrosion Inhibitor is a water based corrosion inhibitor formulated.

It will effectively inhibit corrosion caused by H2S, CO2 salt water and other elements. Designed to provide good film persistency and is dispersible in fresh and brine water. Low points in the bottom of flow lines where water has collected are protected because of the solubility of the product.

Appearance Clear Liquid
Color Light Brown
Specific Gravity @ 25°C 0.95 – 0.99
pH 7 ~ 9
Solubility Water soluble, oil dispersible

A rule-of-thumb dosage rate is 10 – 20 ppm based on water production. This should be varied in accordance with the severity of the problem. Frequency and method of application vary over a wide range, depending upon individual characteristics.

Corrosion Inhibitor is non-flammable liquid. Use in well ventilated area. Keep container tightly closed when not in use. Wear appropriate PPE.

Packaging in 200 liters drum.

Sacrificial Anodes are highly active metals that are used to prevent a less active material surface from corroding

A simple method of protection connects the metal to be protected to a more easily corroded “sacrificial metal” to act as the anode. The sacrificial metal then corrodes instead of the protected metal. For structures such as long pipelines, where passive galvanic cathodic protection is not adequate, an external DC electrical power source is used to provide sufficient current. Cathodic protection systems protect a wide range of metallic structures in various environments.

Common applications are:
steel water or fuel pipelines and steel storage tanks such as home water heaters; steel pier piles; ship and boat hulls; offshore oil platforms and onshore oil well casings; offshore wind farm foundations and metal reinforcement bars in concrete buildings and structures. Another common application is in galvanized steel, in which a sacrificial coating of zinc on steel parts protects them from rust.


Sacrificial Anodes

Scale Inhibitor from diphosphonic acid (C2H8O7P2)blended and effective scale inhibitor used to prevent scale formation due to Calcium Carbonate,Magnesium Hydroxide and other common scale forming salts. No maintenance is required in carrying out the addition of this scale inhibitor. Its liquid form makes it convenient to use directly and the dosage level is determined with respect to the properties of the water to be treated.


Appearance  Clear Liquid
Color  Colorless
Solubility  Soluble in water
pH  3.0 ~ 5.0
Specific Gravity  1.15 ~ 1.40
Odor  Product specific
Viscosity  < 20 cSt

Avoid contact with eyes, skin and clothing. In case of content eyes , immediately flush with water for 15 menutes and seek medical aid. Wash skin immediately if there is any contact and remove contaminated clothing.
The optimum dosage will depend upon the type of the system and severity of the scaling
20 liter per pail or 200 liter per drum

Showing all 3 results