Corrosion Coupon

Great deals and offers on all Corrosion Coupon

Great deals and offers on all Corrosion Coupon

Specifications:

Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 2″ x 7/8″ x 1/8″
Reference Catalog Bcormon

A connection fitting with a solid or hollow plug, it carries the monitoring of internal corrosion or an injection device. The access fitting is permanently attached to the container or driver, and the service valve and the retriever are used to insert or remove the different probes, corrosion coupons or injection equipment.

Material 316L / SS, A105 CS, Other
Standard ASME B31.3
Standard Temperature Standard Temperature Rating with Viton/Teflon Seals:
From -15° F (-26° C) Up To +400° F (+204°C)
Type Fitting Flarweld, Sockedweld, Buttweld, NPT

Specifications:

Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 3″ x 1/2″ x 1/16″
Reference Catalog Bcormon

Specifications:

Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 3″ x 1/2″ x 1/16″
Reference Catalog Bcormon
Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 3″ x 1/2″ x 1/16″

Specifications:

Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 3″ x 1/2″ x 1/16″
Reference Catalog Bcormon

Coupon Holder Solutions for the prevention and control of corrosion, as a variety of coupon support styles to adapt to your request.

Holder of the strip: Used to suspend corrosion coupons of 3 “or 6” in the area to monitor
Disk Holder: Offers several monitoring advantages of corrosion on stripping coupon support sets.
Multiple Disc: Available for pipes with diameters of 6 “or more. This method of protecting pipe corrosion.
Ladder Strip: Sleep the six-strip corrosion coupons (3 pairs) from a single access adjustment point.

corrosion coupon holder monitoring

Corrosion inhibitorSpecifications:

Std. Length 18″
24″
30″
36″
Material 316L / SS, PTFE
Temperature Rating 360° C
Pressure Rating 1500 PSI / 103.4 Bar
Mounting 1″ Full Port Valve (min.)
Standard Meets NACE MR0175 and MR0103
Reference Catalog Bcormon

Specifications:

Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension OD:1.25″, Thickness 1/8″
Other Type Multiple disc coupon
Multiple Disc Coupon Monitoring is available for pipes with diameters of 6″ or more
Refer Catalog Bcormon

HD protective cover for access fitting

HD protective cover designed to protect the exposed threads on access fittings from mechanical damage, dust, dirt and moisture.
Secondary Process Containment Covers offer an extra layer of protection when a second level of safety is required. With a pressure rating 3600 psi to 6,000 psi and standard viton o-ring, the high pressure retaining covers meet or exceed the extra level of protection required. ( standard only not include p gauge and bleed valve).

Also available c/w bleed and P gauge ( additional price )
A viton o-ring creates a tight seal retaining any pressure that may build up. The bleed valve allows any pressure accumulation to be released prior to the cover being backed off. The pressure gauge is used to indicate if there is any pressure build up.

Material 316L / SS, A105 CS, Other
Type – Heavy Duty Protective Cover Without Hole
– Heavy Duty Protective Cover With Hole
– Heavy Duty Protective Cover With Bleed Valve and Pressure Gauge

The Hollow Plug Body Assy is a key component to the high pressure access fitting assembly, as the plug body provides the seal in the access fitting, there by maintaining line pressure.

The plug also serves an important function of holding the monitoring equipment which is exposed to the system, and is the component to which the Retriever attaches in order to access and service the monitoring equipment.

Hollow Plug Body 316L / SS, Others
Primary Packing PTFE Glass
Hollow Plug Packing Retaining Nut 316 SS
Probe Packing PTFE GLass
Pipe Plug 316 SS, Others
Set Screws 316 SS
Seal Nut 316 SS

Hollow Plug – used in conjunction with:

  • Electrical Resistance probes
  • Linear Polarization probes
  • Galvanic and Hydrogen probes

HOLLOW PLUG ASSEMBLY
The standard Hollow Plug Assembly consists of:

  • Hollow Plug Body
  • Primary Packing
  • Hollow Plug Packing Retaining Nut
  • Probe Packing
  • Hollow Plug Seal Nut
  • Pipe Plug

Specifications:

Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension OD:1.25″, Thickness 1/8″
Refer Catalog Bcormon

Specifications:

Weight Below 50 gram union depend on the model, details will be listed on the envelope
Material Stainless Steel, Carbon Steel
Dimension Ø ¼” x 3″ (Ø 6.3mm x 76.2mm)
Refer Catalog Bcormon

Mechanical Solid Plug Body are the internal parts of the access fittings which act as the seal of access fitting to maintain the line pressure as well as the retrievable carrier for holding the monitoring devices.

Solid Plug Body – used for various types of coupon holders, sacrificial sand probes and Chemical Injection/Sampling devices

SOLID PLUG ASSEMBLY:
The standard Solid Plug assembly consists of:

Solid Plug Body 316L / SS, Others
Primary Packing PTFE Glass
O-ring Viton
Solid plug Nut with set screw 316L / SS, Other
Pipe Plug 316L / SS

Showing all 14 results