This is where you can add new products to your store.

Specifications:

Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 2″ x 7/8″ x 1/8″
Reference Catalog Bcormon

A connection fitting with a solid or hollow plug, it carries the monitoring of internal corrosion or an injection device. The access fitting is permanently attached to the container or driver, and the service valve and the retriever are used to insert or remove the different probes, corrosion coupons or injection equipment.

Material 316L / SS, A105 CS, Other
Standard ASME B31.3
Standard Temperature Standard Temperature Rating with Viton/Teflon Seals:
From -15° F (-26° C) Up To +400° F (+204°C)
Type Fitting Flarweld, Sockedweld, Buttweld, NPT

Specifications:

Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 3″ x 1/2″ x 1/16″
Reference Catalog Bcormon

Specifications:

Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 3″ x 1/2″ x 1/16″
Reference Catalog Bcormon
Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 3″ x 1/2″ x 1/16″

Specifications:

Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension 3″ x 1/2″ x 1/16″
Reference Catalog Bcormon

Corrosion Inhibitor is a water based corrosion inhibitor formulated.

It will effectively inhibit corrosion caused by H2S, CO2 salt water and other elements. Designed to provide good film persistency and is dispersible in fresh and brine water. Low points in the bottom of flow lines where water has collected are protected because of the solubility of the product.

CHARATERISTICS:
Appearance Clear Liquid
Color Light Brown
Specific Gravity @ 25°C 0.95 – 0.99
pH 7 ~ 9
Solubility Water soluble, oil dispersible

APPLICATION:
A rule-of-thumb dosage rate is 10 – 20 ppm based on water production. This should be varied in accordance with the severity of the problem. Frequency and method of application vary over a wide range, depending upon individual characteristics.

STORAGE AND HANDLING:
Corrosion Inhibitor is non-flammable liquid. Use in well ventilated area. Keep container tightly closed when not in use. Wear appropriate PPE.

PACKAGING
Packaging in 200 liters drum.

Coupon Holder Solutions for the prevention and control of corrosion, as a variety of coupon support styles to adapt to your request.

Holder of the strip: Used to suspend corrosion coupons of 3 “or 6” in the area to monitor
Disk Holder: Offers several monitoring advantages of corrosion on stripping coupon support sets.
Multiple Disc: Available for pipes with diameters of 6 “or more. This method of protecting pipe corrosion.
Ladder Strip: Sleep the six-strip corrosion coupons (3 pairs) from a single access adjustment point.

corrosion coupon holder monitoring

Corrosion inhibitorSpecifications:

Std. Length 18″
24″
30″
36″
Material 316L / SS, PTFE
Temperature Rating 360° C
Pressure Rating 1500 PSI / 103.4 Bar
Mounting 1″ Full Port Valve (min.)
Standard Meets NACE MR0175 and MR0103
Reference Catalog Bcormon

Specifications:

Material AISI 1018, ASTM A106 gr B, to order
Weight Below 50 gram union depend on the model, details will be listed on the envelope
Standard NACE RP-0775 and ASTM G-1
Dimension OD:1.25″, Thickness 1/8″
Other Type Multiple disc coupon
Multiple Disc Coupon Monitoring is available for pipes with diameters of 6″ or more
Refer Catalog Bcormon

HD protective cover for access fitting

HD protective cover designed to protect the exposed threads on access fittings from mechanical damage, dust, dirt and moisture.
Secondary Process Containment Covers offer an extra layer of protection when a second level of safety is required. With a pressure rating 3600 psi to 6,000 psi and standard viton o-ring, the high pressure retaining covers meet or exceed the extra level of protection required. ( standard only not include p gauge and bleed valve).

Also available c/w bleed and P gauge ( additional price )
A viton o-ring creates a tight seal retaining any pressure that may build up. The bleed valve allows any pressure accumulation to be released prior to the cover being backed off. The pressure gauge is used to indicate if there is any pressure build up.

Material 316L / SS, A105 CS, Other
Type – Heavy Duty Protective Cover Without Hole
– Heavy Duty Protective Cover With Hole
– Heavy Duty Protective Cover With Bleed Valve and Pressure Gauge

The Hollow Plug Body Assy is a key component to the high pressure access fitting assembly, as the plug body provides the seal in the access fitting, there by maintaining line pressure.

The plug also serves an important function of holding the monitoring equipment which is exposed to the system, and is the component to which the Retriever attaches in order to access and service the monitoring equipment.

Hollow Plug Body 316L / SS, Others
Primary Packing PTFE Glass
Hollow Plug Packing Retaining Nut 316 SS
Probe Packing PTFE GLass
Pipe Plug 316 SS, Others
Set Screws 316 SS
Seal Nut 316 SS

Hollow Plug – used in conjunction with:

  • Electrical Resistance probes
  • Linear Polarization probes
  • Galvanic and Hydrogen probes

HOLLOW PLUG ASSEMBLY
The standard Hollow Plug Assembly consists of:

  • Hollow Plug Body
  • Primary Packing
  • Hollow Plug Packing Retaining Nut
  • Probe Packing
  • Hollow Plug Seal Nut
  • Pipe Plug

Mechanical Retriever Tools is a precision tool which allows safe, easy insertion and removal of various equipment and tools through a Access Fitting, without de-pressurizing the pipeline or vessel.

The retriever’s main components are manufactured from stainless steel, and receive a chroming treatment for resistance to mechanical / corrosion damage and to ensure many years of reliable service. Seven standard sizes of retrievers are offered to cover most service requirements, while custom-ordered sizes are available upon request.

The mechanical retriever is designed to operate under mechanical principles, and the number of turns to completely seat or retract a component is a known constant.

Pressure Rating – 3600 PSI (24.8 Mpa)
– 6000 PSI (41.3 MPa)
Material 316L / SS
Standard Meets NACE MR0175 and MR0103
Stoke Length For Type 36:
– 14 Inch
– 18 Inch
– 25 Inch
For Type 60:
– 37 Inch
– 49 Inch
– 61 Inch
Refer Catalog Bcormon
Material 316L / SS
Weight 20 gr

Showing 1–15 of 25 results